
Fence on a low wall: the murete and pillars that carry your fence
Most villa fences on the Costa del Sol stand on a low wall, the murete. It is the part you notice least once finished and the part that decides whether the fence stays straight.
A fence on a low wall is a boundary in which a short masonry or concrete wall, built on a continuous foundation, carries pillars or posts and an infill of slats, mesh, sheet or panels above it.
What is a murete, and why is it so common in Spain?
In short: a murete is a low wall on a continuous footing that lifts the fence off the ground, closes the gap at the bottom and gives a firm line for pillars.
Walk through any urbanisation between Nerja and Manilva and you will see the same structure again and again: a low wall, often rendered and painted white or cream, pillars at regular intervals and an infill on top. It is not just tradition. The low wall solves several practical problems at once.
It keeps soil, gravel and irrigation water on your side of the line. It stops dogs and small animals squeezing under the fence. It protects the bottom of the infill from strimmers, sprinklers and splash. And because it sits on a continuous foundation, it gives the pillars and posts a stable, straight base along the whole length.
The murete can be built in plain concrete block for rendering, in decorative split-face block, or as a precast plinth. Which one fits depends on the look you want and on the rules of your community.

What can go on top of the wall?
In short: almost any infill – aluminium or steel slats, composite, rigid mesh, profiled sheet or precast concrete panels – as long as the pillars are designed for it.
The infill decides how private the fence is and how much wind load the structure has to take. Closed infills like slats, sheet or composite catch more wind than mesh, so the pillars and footing are sized accordingly.
- Slats on rendered pillars give the modern villa look; more on vallasaluminiomalaga.eu.
- Composite gives a timber look with less maintenance; see vallascompositemalaga.eu.
- Rigid mesh keeps views open while the wall still blocks dogs and debris.
- Precast concrete panels between pillars create an almost wall-like boundary.
If you are still choosing, our fence types overview is the place to compare.

Do you always need a low wall?
In short: no – on long rural lines or open plots, posts in individual footings are often the better choice.
A low wall adds excavation, concrete, blockwork and finishing to the job. On a villa front that is money well spent. On several hundred metres of finca boundary it may not be. Posts set in concrete footings follow the ground more easily and need less material.
The deciding questions are: do you need to keep animals from digging under? Is the ground sloping in a way that needs a level base? Is the infill heavy or wind-catching? Does your community require a wall? We set out the full comparison in our article on a low wall or posts only, and the common pitfalls in mistakes when choosing a fence.
What should you check before building a wall on the boundary?
In short: the boundary line, local height and opacity rules, community statutes and drainage – before any foundation is dug.
A wall is a permanent structure, so getting it wrong costs more than with a light fence. Local plans often set separate limits for the solid part of a boundary and for the total height, and some communities specify the wall finish and colour. Our guides on fence height rules and boundary and party walls explain the questions to ask.
One more point that owners often miss: a low fence wall is not a retaining wall. If your garden is higher than the neighbour's, or the street, and the wall would hold back earth, it needs a technician's design – an architect, building engineer or civil engineer. We build fences, not retaining structures, and we will tell you honestly when a design crosses that line.

How do you look after a fence on a low wall?
In short: keep drainage clear, repaint rendered surfaces when they weather and check infill fixings from time to time.
The wall itself asks little. Rendered and painted walls need repainting when the sun and rain wear the finish, and cracks in render should be looked at early so water does not get in. Make sure irrigation does not spray the wall constantly and that water can escape where the garden is higher on one side – weep holes or a gravel strip help.
On top, look at the fixings of slats or panels after storms, and keep plants from growing through mesh. If a pillar shows a crack, ask for it to be checked rather than filling it cosmetically; cracks can point to movement in the footing.
How we build it – step by step
- Setting out
We mark the line, pillar positions and any steps in level with stakes and string.
- Excavation
We dig a continuous trench for the wall footing, adapting to rock, fill or soft ground.
- Foundation
We pour the continuous footing with the starter bars needed for pillars, as the design requires.
- Wall and pillars
We lay the block courses and raise the pillars, keeping the line and levels true.
- Finishing the wall
Where included, we render or finish the wall and pillars and fit caps.
- Infill
We fit slats, mesh, sheet, composite or panels between the pillars and fix them securely.
- Clean-up and handover
We clear spoil and offcuts, clean the area and go through the finished fence with you.
When is it the right choice – and when not?
A good fit if…
- Villa and townhouse fronts where appearance matters
- Gardens with dogs that dig
- Sloping gardens that need a level, stepped line
- Communities that require a wall with a specified finish
- Closed infills that catch wind
Consider another option if…
- Very long rural boundaries where posts are more practical
- Walls that must hold back earth – these need a technician
- Owners who want a temporary or easily moved fence
What affects the cost?
We don't publish fixed prices: every fence is quoted line by line using these factors.
- Length in linear metres
- Wall height and pillar height
- Block type: plain for rendering or decorative split-face
- Rendering, painting and caps
- Type of infill on top
- Foundation size and ground conditions
- Steps in level along the line
- Access for concrete and materials
- Removal of an existing fence or wall base
- Licence fees
Articles and guides

Fence on a low wall or posts only: which base suits your property?
Every fence stands on something. The choice between a continuous low wall and posts set directly in individual footings shapes how the fence looks, performs and ages.
View details →
Types of fence: how to choose the right one for your property
Six families of fence cover almost every home, plot and finca in Málaga province. The right one depends on what the fence has to do, where it stands and what your local rules allow.
View details →
Dog-proof fencing for homes and gardens in Málaga province
A dog that gets out once will try again in the same place. We build fences that close the usual escape routes – under, over and through – with a solid base and the right infill.
View details →Fence height rules: how high can your fence be in Málaga province?
There is no single national fence height in Spain. Each town sets its own limits, often with separate rules for the solid part and the open part of a fence – and urbanisations can add more.
View details →Frequently asked questions
How high should a low wall be?
That depends on the look you want, the infill and, above all, local rules on the solid part of a boundary. We do not quote heights from memory; check with your ayuntamiento or see our height guide.
Can a low wall be built on an existing footing?
Only if the existing footing is sound, straight and suitable for the new load. We inspect it first and, if in doubt, recommend a new footing.
Rendered wall or split-face block?
Rendered walls can be painted to match the house and many communities prefer them. Split-face block needs no render but gives a more textured look. Both need the same good foundation.
Does the wall need drainage?
Where the ground is higher on one side or irrigation is heavy, yes. Weep holes or a drainage strip stop water building up behind the wall.
Can I add a fence on top of my existing wall?
Often yes, if the wall and its footing can take the extra height and wind load. We check the wall before proposing an infill.
Is a low wall the same as a retaining wall?
No. A fence wall separates; a retaining wall holds back earth. Retaining walls need a technician's design and are not something we build.
Can you leave space for a future gate?
Yes. We can build pillars and leave the opening ready. Gates themselves are not part of our services.
Will the wall crack?
Cracks usually come from poor foundations, missing movement joints or water. Building on a proper footing with suitable details reduces the risk considerably.
Can the wall follow a slope?
Yes, usually by stepping the wall and the infill in sections, which keeps each panel level.
Who decides the wall colour?
You do, within any limits set by your community statutes. Some urbanisations specify colours exactly.
Can you build a wall shared with my neighbour?
Yes, if you both agree. See our page on boundary fences with neighbours and our party wall guide for what to agree first.
Send photos – get an itemised fence quote
Send photos and the approximate length of your fence line. We reply with questions or a visit, then an itemised quote with no commitment. Owners abroad welcome.